KTM 690 ENDURO EU - Manual (Page 85)

MAINTENANCE WORK ON CHASSIS AND ENGINE
83
100254-11
– Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
– Remove screws
 .
– Remove the cover  with membrane  .
– Press the brake caliper by hand on to the brake disc in order to press back the brake
pistons. Ensure that brake fluid does not overflow from the brake fluid reservoir and
suction it off if necessary.
Info
Make sure when pushing back the brake pistons that you do not press the brake
caliper against the spokes.
100290-10
– Remove split pin  , remove bolt  toward the right by striking it and remove the brake
linings.
– Clean brake caliper and brake caliper support.
– Check parts for damage and wear. Replace damaged or worn parts.