Kodak RP 50 2J0686 User Manual
Page 40
Advertising
System Operating Procedures
3-8
October 2002
TIP: Practice the following steps in the light with an empty cardboard core
before you load a new roll of paper in the dark.
CAUTION: Loading paper into the paper cassette must be completed in
a darkroom with the lights off.
7. Position the paper so that the lead edge of the paper is away from you.
8. Insert the core support assembly into the roll of paper as shown.
9. Push the cardboard core toward the gear until it engages the detent.
10. Install the screw lock onto the core support assembly and ensure that it is
snug.
CAUTION: Do not overtighten the screw lock.
11. Place the core support assembly with the full paper roll into the supply
cassette.
detent
cardboard core
Advertising