Kodak RP 50 2J0686 - Manual (Page 62)

System Operating Procedures
3-30 October 2002
Operational Modes
There are three operational modes for the processor:
• Operator
• Key Operator
• Service
To access the features of the processor, it must be in the correct operational
mode. The table below will help you determine the correct operational mode for
each feature.
Feature
Operator
Mode
Key
Operator
Mode
Service
Mode
Dryer Temperature Yes Yes Yes
Material Mode (A or B) Yes Yes Yes
Clear Jam or Stopped Yes Yes Yes
Control Strip Yes Yes Yes
Current Time/Day Clock Yes Yes Yes
Development Time Yes Yes
Chemical Temperatures Yes Yes
Replenishment Rates Yes Yes
Seven Day Timer On/Off Times Yes Yes
Manual Override of Devices Yes
Calibration Settings Yes
Calibration Cycles Yes
Display of Minimum and Maximum Readings Yes
Memory Dump Yes
Setup Menu Yes