Kodak RP 50 2J0686 - Manual (Page 83)

Maintaining the Equipment
October 2002 4-9
Cleaning the Feed Table and the Processor Entrance Sensors
WARNING: Turn off the main power to the processor on the operator control
panel and at the circuit breaker to prevent injury from moving
parts and high voltage electricity and to prevent losing the
processor parameters.
1. Remove:
• top cover
• light tight cover
• developer entrance guide
2. Clean the feed table and the processor entrance sensors with a clean damp
cloth or sponge.
top cover
light tight cover
developer entrance guide
feed table
entrance sensors