Konica Minolta IP-511 - Manual (Page 103)

Chapter 4 Control Panel Setup
4-25
●
Job Combination
You can combine and print the data held in the print controller's hard disk as a result of the [HD-105
Image Storage] settings on the printer driver and/or using the Copier in store mode.
With some application software, the setting for the printer driver also is saved. When you use [Job
ID / Password] to print out a sharing file on a network or a file that is likely to be printed out by other
people as well, save those files after deleting the [Job ID] and [Password].
Job Combination Procedures
On your computer:
1.
Get the Printer Properties dialog displayed.
2.
Put a check in [HD-105 Image Storage] on the [Options] tab of the Printer Properties
dialog.
3.
Click the [Settings] button.
[Job Combination Print Settings] dialog appears.
When you have already set up the job ID and the password on the [Job Combination Print Settings]
dialog, go to step 7.
4.
Enter your User ID on the [UserID] text box.
You can select any eight-digit number for user ID.
If the Printer EKC has been set up, this User ID is identified as a password for the Printer EKC.
The Printer EKC is discussed in "Chapter 5 Printer EKC".
(p.5-1)
5.
Enter your Job ID on the [JobID] text box.
You can select any eight-digit number for job ID.
6.
Enter your password in the [Password] text box.
You can select any eight-digit number or character for Password.
7.
Click the [OK] button.
8.
Set up the other functions if necessary, then start to print.
On the control panel:
Refer to the manual of the copier for how to perform the job combination settings from the control panel
of the copier.
HOME