Home – Konica Minolta IP-511 User Manual
Page 54
Chapter 3 Printer Driver Functions
3-18
Password Print
When [Password Print] is checked, you can use password print (confidential output) function to print the
confidential documentation.
In this method, both settings on computer and the operation from the LCD touch panel are used. Default
is [Off].
Refer to "Chapter 4 Password Print (Confidential Output)" for password print procedure.
Settings
Open the [Password Print Settings] dialog for password setting.
Enter your user ID in the [UserID] text box. You can select any 8-digit number for the User ID.
Enter your password in the [Password] text box. You can select any 8-digit number or character for the
Password.
When the Password is entered, the password of [Job Combination Print Settings] dialog for Password
Print is replaced with the password of [Password Print Settings] dialog.
You must enter the same password (8 digits or less) in the User ID text box that you set up on the
copier for Printer EKC.
If you do not enter the correct password or if you leave the User ID text box blank, the print job is
not performed and is registered as Unsuccessful Jobs. When in doubt about the password for
Printer EKC, ask your system administrator.
Features
Features use the special functions of the main body printer, with which you can set up various printing and
finishing methods.
When you select the function you would like to use from the upper list, the actual setting of the function
you selected will be shown on the lower box.
You can select the other setting of the function you selected from the list shown by clicking the [
▼] button
of the lower box.
Features you can select are as follows:
HOME