Konica Minolta IP-511 - Manual (Page 95)

Chapter 4 Control Panel Setup
4-17
■
Print Job
●
Cancel
You can stop the job reserved or the job in progress. If the job is still on your computer first, delete the job
from your computer and press the [STOP / CLEAR] key on the control panel. You cannot stop the
remaining job completely by only pressing the [STOP / CLEAR] key. The [STOP / CLEAR] key can clear
the memory of the print controller and E-RDH in the main body printer but will not clear the remaining jobs
on your computer.
How to cancel the job
1.
While a job is currently printing, touch the [Stop] key to cancel the job.
The confirmation screen will appear.
2.
Touch the [EXIT] to confirm the cancelation.
Touch the [CONTINUE] to continue printing without canceling the job.
NON COMPLETE JOB LIST
You may want to view a list of the print jobs that have not output because of cancellation or deletion from
the queue.
To do this, touch [NON COMPLETE JOB LIST] in the Job Status Screen.
The list is displayed with job names, user names, file names, status, etc.
HOME