Konica Minolta IP-511 - Manual (Page 80)

Chapter 4 Control Panel Setup
4-2
■
Control Panel
You can set up the printing system from the control panel of the main body printer (copier).
This chapter describes the basic operation of the control panel and the setup menu as well as the func-
tions of the printing system setup.
Refer to the operating manual of the copier for other functions and screens of the control panel.
●
Names and Functions of the Control Panel
The control panel has the following names and functions.
1.
LCD TOUCH SCREEN
Displays printing system status; various setting menus and setup items; help information; interactive
screens; and touch keys for selecting all functions.
2.
CHECK
Displays a screen showing all settings that are selected for the current job when setting up the Wait
Mode on the printer driver screen.
3.
MODE
Switches the machine operation mode to copier, printer, and scanner/server in turn.
4.
KEYPAD
Enters numeric values.
5.
INTERRUPT
Stops printing in progress to allow copying from the platen glass.
6.
STOP
Stops the copying sequence, scanning or printing; deletes the stored memory.
7.
TIMER
Lights when the timer function is set.
8.
POWER SAVER ON/OFF
Activates power-saving mode for times when the copier is inactive, or activates timer interrupt mode
when weekly timer function is active.
9.
START
Activates scanning or copying.
Restarts the printing after Wait Mode - Wait or Proof.
1
2 3
14 13 12
4
11 10 9
5 6 7
8
COPY
SCANNER / SERVER
PRINTER
CHECK HELP
JOB MEMORY
AUTO RESET CLEAR QTY. COUNTER
INTERRUPT
PROOF COPY
START
STOP
POWER SAVER
ON / OFF
TIMER
HOME