Konica Minolta IP-511 - Manual (Page 61)

Chapter 3 Printer Driver Functions
3-25
Features - Fold & Stitch
You can make the following finish settings:
[Fold Only] foldes each set of copies and outputs to the tray of the finisher.
[Fold & Stitch] foldes and stitches each set of copies and outputs to the tray of the finisher.
[DM-Fold] lets output sheets be folded into three equal, smaller folds and be output to the tray of the fin-
isher.
Fold & Stitch Fold Only DM-Fold
[Fold & Stitch] cannot be performed in the following cases:
• When [FS-210 Finisher] is not available
• When [Collate] is not selected in [Copies]
• When [A6] is selected in [Paper size]
• When [Thick Paper], [Tab Sheets], [OHP (Transparency)], [OHP-Interleave (Blank)], [OHP-Inter-
leave (Print)] is selected in [Media Type]
• When [On] is selected in [Features]-[Offset], [Features]-[Staple] and/or [Features]-[Punch]
Features - Wait Mode
[Wait] enables checking of the current job settings on the LCD touch screen of the main body printer
[Wait with Proof] enables checking of the current job settings on the LCD touch screen of the main body
printer and to see how the printed job will look before printing out multiple sets.
Refer to "Chapter 4 Print Job - Check".
(p.4-18)
Features - Image Shift
[On] creates a new binding margin on print papers.
You can set the value of new binding margin via the LCD touch screen of the main body printer.
Output Order
Determines whether to output sheets with their print surface facing up or down.
Restore Defaults
By clicking the [Restore Defaults] button, the [Paper] tab settings return to defaults.
HOME