Konica Minolta IP-511 - Manual (Page 77)

Chapter 3 Printer Driver Functions
3-41
[Setup] Tab
Available options
This list shows available printer options. If you purchase this optional accessory you can make the printer
driver aware of it by selecting it from this list and clicking the [Add] button. The selected option's label will
move into the list of [Installed options].
Installed options
This list displays the selected options from the list of [Available options].
Add
When you click the [Add] button after selecting an option from the list of [Available options] (such as Fin-
isher, Hard Disk, Large Capacity Tray, Trimmer Unit, Punch Unit etc.), the driver software will make the
option available from that point on.
Remove
Clicking the [Remove] button after selecting an option from the list of [Installed options] will remove the
option from the list of [Installed options]. The option will move to the list of available options, ready to
install later.
Installed memory
You can select the amount of memory you have installed in your printer from the list shown by clicking the
[
▼] button.
Your printer supports expansion up to 192 megabytes of RAM using standard DIMM modules. It comes
with 64 megabytes pre-installed on the print controller, which should be sufficient for general office use.
HOME