Konica Minolta IP-511 - Manual (Page 35)

Chapter 2 Printer Driver Setup
2-17
■
Test Page Print
You can check whether the printer driver functions properly by performing a test page after the printer
driver has been installed.
To print the test page, perform the following steps.
1.
Click the [Start] button of the task bar. Then, select [Settings] from the Start menu
and click [Printers] in the sub menu.
The [Printers] window will open.
Opening from [My Computer]
To open the [Printers] window, double-click the [Printers] folder (or [Control Panel] - [Printers]) after
double-clicking the [My Computer] icon on the desktop.
2.
Right-click [Konica IP-511 PCL] icon and click [Properties].
[Konica IP-511PCL Properties] window will appear.
3.
Select [General] of [Konica IP-511 PCL Properties] and click the [Print Test Page] but-
ton.
A test page print will start and a screen to confirm print end will appear.
4.
Click the [Yes] button.
A test page print will end.
Windows 95/98/Me
In case of Windows NT/2000, the [General] tabs is displayed differently, but you can find and click
the same [Print Test Page] button.
HOME