Konica Minolta IP-511 - Manual (Page 56)

Chapter 3 Printer Driver Functions
3-20
Features - Staple
[Single-Left], [Double Top] or [Double Left] makes staple each set of copies and output to the tray of the
finisher.
Stapling is performed as shown for the following orientations:
Single Left (Portrait) Single Left (Landscape)
Double Top (Portrait) Double Top (Landscape)
Double Left (Portrait) Double Left (Landscape)
Single Right (Portrait) Single Right (Landscape)
Double Right (Portrait) Double Right (Landscape)
[Staple] cannot be performed in the following cases:
• When Finisher is not available
• When [A6] or [B6] is selected in [Paper size]
• When [Thick Paper], [OHP (Transparency)], [OHP-Interleave (Blank)], [OHP-Interleave (Print)]
is selected in [Media Type]
• When [Booklet] or [Booklet-Right] is selected in [Features] - [Combination]
• When settings other than [None] are selected in [Features] - [Fold & Stitch]
• When [Sub Tray] is selected in [Output Tray]
HOME