Kyocera SS-66K - Manual (Page 20)

How to Attach the Grip Belt
20 Before Use
■ The separate vibrator will vibrate when it detects incoming or outgoing
calls. It also vibrates when the phone is accessing the network, for
example when settings are being updated. To ensure you can feel it
clearly, always carry the vibrator on your belt or another location in close
contact with your body.
● The battery (AAA size) for the separate vibrator has a limited life.
Although the battery life depends on how frequently the phone is
used, you should replace the battery with a new one when the
vibration has weakened. Replace the battery with a similar alkaline
cell battery.
CAUTION!
1.
Remove the battery housing cover.
2.
Check the + and - polarities of the
battery and insert it.
1. Fasten the grip belt screw on the top of the phone using a coin.
■ Using a grip belt can help you hold the phone.
2. Place the belt through the hole, as shown below.
3.
Adjust the length of the strap to fit your hand.
■ Loading the battery
Separate Vibrator