Kyocera SS-66K - Manual (Page 84)

Security (cont.)
84 Security
Setting the Security Functions ("Security")
You can change the Security settings using the following procedure:
1. Press .
The Main Menu is displayed on the screen.
2.
Use / to select "Security", then press .
The Security Menu is displayed, which provides the following functions:
1. Keylock Locks key operations.
2. PIN1 ON/OFF Enables/disables the PIN1-based safeguard applied
when your phone is switched on.
3. New PIN1 Sets a new PIN1 code.
4. New PIN2 Sets a new PIN2 code.
5. Fixed dial Sets restriction on outgoing calls using the Fixed Dial
feature.
OK
Menu
1. Setting Keylock ("Keylock")
The "Keylock" function locks the keys on your phone to prevent
accidental operation when you are carrying it in a bag or pocket.
1.
Use / to select "Keylock", then press .
The Keylock confirmation message appears.
2. Press .
The screen enters Standby mode in the Keylock state.
• Keylock cannot be set during a call.
• In the Keylock state, you cannot use any keys other than the
Power/Hang-up key.
• You can answer an incoming call even in the Keylock state.
3. To cancel Keylock, press , , then .
This cancels Keylock and the screen returns to Standby mode.
When canceling Keylock, press the 3 keys in succession at intervals of
less than 3 seconds.
Even when Keylock has been set, you can answer an incoming call by
pressing
.
NOTE
CAUTION!
CAUTION!
OK
OK