Kyocera SS-66K - Manual (Page 21)

21 Before Use
Before
Use
ON OFF ON OFF
STO P
Squeeze the clip at q from both
sides and pull it toward you. If the
clip won't come off easily, squeeze
the clip in the same way and pull it
toward you while turning it left and
right.
■ Removing the belt clip
■ Before using the separate vibrator
■ Attaching the belt strap
● This separate vibrator works with Iridium phones only. Since no ID is
required to use the separate vibrator, it may detect incoming or outgoing
calls to or from other Iridium phones in the vicinity.
● Place the separate vibrator so that you can feel the vibration directly
(belt, etc). You will feel less vibration if the separate vibrator is not in
close contact with your body.
● Since the separate vibrator uses a small current, it may not vibrate or
may vibrate late depending on the place and other conditions such as:
• When the phone unit is in a metal or thick bag
• When the separate vibrator is 1.5 m or more away from the phone unit
• When there is a metal wall or a person standing between the separate
vibrator and the phone unit
• When the separate vibrator and the phone are moving apart
● Use the separate vibrator as far away as possible from devices such as
radios.
● Do not drop the vibrator or let it get wet, as this may damage it.
CAUTION!
Insert the hook of the belt clip in the slot and push the clip in the
direction of the arrow while squeezing it at
q from both sides.
Slot
Hook Power switch
Switch on the separate vibrator before use.
Stop button
Press this button to stop vibration.
Belt clip
■ Attaching the belt clip
ON OFF ON OFF
STO P
ON OFF ON OFF
STO P