Kyocera SS-66K - Manual (Page 67)

67 Messages
Messages
1-2. Replying to a Received Text Mail ("Reply")
The "Reply" function sends a reply message to the sender of a Text mail.
1. Press with a Text mail displayed.
The Option Menu is displayed.
2.
Use / to select "Reply", then press .
The screen enters the Reply mode. If the reply message requires editing,
do so first as described in "1-1. Editing a Text Mail" on page 66.
3. Press .
The Option Menu is displayed.
1. Save Saves the edited Text mail in the SIM card.
2. Send Transmits the edited Text mail.
3. Save & Send Saves and transmits the edited Text mail.
■ To save the Text mail reply:
Use / to select "Save", then press .
This saves the edited reply in the SIM card. Phone operations are
temporarily suspended during saving.
■ To transmit the Text mail reply:
Use / to select "Send", then press .
This transmits the edited reply. Phone operations are temporarily
suspended during transmission.
■ To save and transmit the Text mail reply:
Use / to select "Save & Send", then press .
This saves and transmits the edited reply. Phone operations are
temporarily suspended during saving and transmission.
The phone number is only displayed and transmission possible when
the caller's number is provided by the network.
CAUTION!
OK
OK
OK
Opt
OK
Opt
1-3. Extracting a Phone Number from a Text Mail ("Extract")
The "Extract" function extracts a phone number from the selected Text
mail, allowing you to dial the number.
1.
Press with a Text mail displayed.
The Option Menu is displayed.
2. Use / to select "Extract", then press .
If the selected message contains a phone number (including numeric
characters, P, -, and +) enclosed in double quotes " ", the phone number is
displayed on the screen. If the phone number has been stored with a
name the Phone Book, the name is displayed instead.
• If the Text mail contains two or more double-quoted phone numbers, you
can select one using / .
• If the Text mail contains no double-quoted phone number, press any key
to return to the Option Menu.
• Pressing with a phone number displayed erases the digit at the
cursor position. Holding down for 1 second or more returns to
Standby mode.
• You can store the displayed or extracted phone number in the Phone
Book by pressing .
Dialing the extracted phone number
Press .
This dials the currently displayed phone number.
Store
NOTE
OK
Opt