Kyocera SS-66K - Manual (Page 81)

81 Services
Services
3. Setting Call Waiting ("Waiting")
The "Waiting" function sets Call Waiting so that you can answer an
incoming call even with another call already in progress.
Extend the antenna before starting this procedure.
1.
Use / to select "Waiting", then press .
The Waiting Menu is displayed.
1. ON Enables Call Waiting.
2. OFF Disables Call Waiting.
3. Status Checks the current Call Waiting status with the network.
2.
Use / to select the desired option, then press .
Your phone saves the setting in the network and displays the result. If you
select "Status", your phone accesses the network and displays the current
setting status.
3. Press any key after checking the setting.
The screen returns to the Services Menu.
OK
OK
CAUTION!
4. Setting Caller's Number Notification ("Caller Id")
The "Caller Id" function enables your phone to display the phone number
of a calling party, or allows a remote phone to display your phone number.
Use / to select "Caller Id", then press .
The Caller Id Menu is displayed, which provides the following functions:
1. Far Id Displays the phone number of the called party when you
dial that number.
2. Your Id Displays your phone number on the called phone.
3. Status Checks the called/calling line identification setting with
the network.
Extend the antenna before starting this procedure.
CAUTION!
OK
4-1. Displaying the Called Party's Number When Dialing ("Far Id")
The "Far Id" function controls the display of the phone number of a called
terminal when you dial that number.
1.
Use / to select "Far Id", then press .
The Far Id Menu is displayed.
1. ON Displays the phone number of the called terminal when
dialing that number.
2. OFF Does not display the phone number of the called
terminal when dialing that number.
2. Use / to select the desired option, then press .
The selected setting is shown on the screen.
3.
Press any key after checking the setting.
The screen returns to the Caller Id Menu.
OK
OK
4-2 . Displaying Your Phone Number on the Called
Party's Phone ("Your Id")
The "Your Id" function controls the display of your phone number at a
called phone.
1. Use / to select "Your Id", then press .
The Your Id Menu is displayed.
1. ON Displays your phone number at the called terminal.
2. OFF Does not display your phone number at the called
terminal.
2. Use / to select the desired option, then press .
The selected setting is shown on the screen.
3. Press any key after checking the setting.
The screen returns to the Caller Id Menu.
OK
OK