Kyocera SS-66K User Manual
Page 33
33
Multiparty Call
Multiparty
Call
The "Exclude" function lets you select one of the parties during a
multiparty call and puts that party on hold. This selection appears in the
In Call Menu when all of the parties in the call are active.
1.
Use
/
during a multiparty call to select the party you want to
put on hold, then press
.
The In Call Menu is displayed.
2.
Use
/
to select "Exclude", then press
.
The "Mpty Held" phone status is displayed on the screen. The selected
party is put on hold.
OK
Menu
Holding a Selected Party
("Exclude")
The "Private" function allows you to select the party you want to talk to.
1.
Use
/
during a multiparty call to select the party you want to
talk to, then press
.
The In Call Menu is displayed.
2.
Use
/
to select "Private", then press
.
The "Private" status is displayed on the screen.
This makes the call to the selected party active. All calls other than the
selected call are put on hold.
OK
Menu
Ending the Call Between You and a Selected Party
("Drop")
The "Drop" function hangs up the selected party.
1.
Use
/
during a multiparty call to select the party you want to
disconnect, then press
.
The In Call Menu is displayed.
2.
Use
/
to select "Drop", then press
.
This ends the call with the selected party.
OK
Menu
Reactivating All Parties
("Join All")
The "Join All" function makes all the parties in a single multiparty call
active.
1.
Press
during a multiparty call.
The In Call Menu is displayed.
2.
Use
/
to select "Join All", then press
.
The "Call Mpty" phone status is displayed on the screen and all the parties
in the multiparty call are made active.
OK
Menu
Holding All Parties
("Hold All")
The "Hold All" function puts all the parties in a multiparty call on hold.
1.
Press
during a multiparty call.
The In Call Menu is displayed.
2.
Use
/
to select "Hold All", then press
.
The "Mpty Held" phone status is displayed on the screen and all the parties
in the multiparty call are put on hold.
OK
Menu
Speaking to a Selected Party
("Private")
Viewing the Charge for the Current Call
("Total Charge")
The "Total Charge" function displays the charge for the current call .
1.
Press
during a call.
The In Call Menu is displayed.
2.
Use
/
to select "Total Charge", then press
.
The call charge is displayed on the screen.
OK
Menu