KORG TRITON STUDIO V2 - Manual (Page 44)

39
Sequencer
Sequencer P5: Track Edit
The Sequencer P5: Track Edit page menu commands “Event
Edit” (
☞PG p.69) and “Erase Measure” (☞PG p.70) now
allow you to view and edit exclusive events.
If you want to edit only exclusive events in “Event Edit,”
open the “Set Event Filters” dialog box and check the Exclu-
sive
box. To erase exclusive events, in the “Erase Measure”
dialog box, set “Kind” to Exclusive.
Changes to the page menu commands
5–1B: Event Edit
Tracks containing exclusive events are now supported. If
you check Exclusive in the “Set Event Filters” dialog box,
the display will be as shown below.
In the same way as for other types of event, you can change
the location (“BT”) of an exclusive event, delete it (Cut but-
ton), copy it (Copy button), or insert it (Insert button). (
☞PG
p.69 “Event Edit”)
If you want to delete all exclusive events in a measure,
choose the page menu command “Erase Measure” and
in the dialog box, set “Kind” to Exclusive, and execute
the command.
You cannot change an exclusive event to a different
type of event such as a note event or control change.
Nor can you change another type of event into an
exclusive event.
5–1F: Erase Measure
The page menu command “Erase Measure” now allows you
to erase exclusive events in the specified measures.
In the dialog box, set “Kind” to Exclusive if you want to
erase only exclusive events. If you select All, all events
including exclusive events will be erased.
Add the above content to the “Parameter Guide” Sequencer
P5: Track Edit page menu commands “Event Edit” (
☞PG
p.69) and “Erase Measure” ( ☞PG p.70).
Sequencer P6: Pattern/RPPR
The Sequencer P6: Pattern Edit page menu command
“Event Edit” (
☞PG p.77) now supports patterns that include
exclusive events.
If you want to edit only exclusive events, check the Exclu-
sive
box in the “Set Event Filters” dialog box of “Event
Edit.“When using other commands as well, exclusive events
in a pattern can be edited in the same way as other types of
events.
Changes to the page menu commands
6-1B: Event Edit
When executing a command on a pattern that contains
exclusive events, and you check Exclusive in the “Set Event
Filters” dialog box, the following type of display will
appear.
When event-editing in a pattern, you can change the
location (“BT”) of an exclusive event, delete it (Cut but-
ton), copy it (Copy button), or insert it (Insert button) in
the same way as other types of event. (
☞PG p.69 “Event
Edit”)
You cannot change an exclusive event to a different
type of event such as a note event or control change.
Nor can you change another type of event into an
exclusive event.
Add the above content to the “Parameter Guide” Sequencer
P6: Pattern/RPPR page menu command “Event Edit” (
☞PG
p.77).
Event indication
Location
Event indication
Location