KORG TRITON STUDIO V2 - Manual (Page 53)

48
time signature, “Tempo” specifies the destination tempo,
and “Program” specifies the program number that will be
automatically created.
0–6O: Mono to Stereo
This is the same function as the Sampling mode, Sampling
P0: Recording page menu command “Sample Mono To Ste-
reo”; here performed on a WAVE file. (For details on the
function and procedure,
☞PG p.94)
The “Overwrite.WAV” and “Name” fields in the dialog box
are as explained in “0–6A: Save WAVE Parameter” steps
2
and 3 .
0–6P: Rate Convert
This is the same function as the Disk mode, 0–3: Utility page
menu command “Rate Convert”; here performed on a
WAVE file. However, you will not be able to specify the
save-destination. (For details on the function and procedure,
☞p.54, PG p.171)
The “Overwrite.WAV” and “Name” fields in the dialog box
are as explained in “0–6A: Save WAVE Parameter” steps
2
and 3 .
Add the content of “0–6: Edit WAVE” following the “Param-
eter Guide” 0–5: Play Audio CD page (
☞PG p.174). Change
the “0–6: Media Info” page to “0–7: Media Info.”
Load AKAI Program File
In previous versions of the operating system, the Disk 0–1:
Load page “Load AKAI Program File” command (
☞PG
p.164) supported only keymap-related parameters in the
creating of a multisample. In version 2.0, parameters such as
key group, key group zone, oscillator, pitch, filter, amp/pan,
and EG are also supported, allowing the TRITON STUDIO
to create a completely playable final sound. Complex AKAI
programs that required you to re-edit the multisamples after
loading in the previous version can now be loaded and
reproduced with a higher degree of accuracy.
28) Load AKAI Program File
1 Select an AKAI Program file in the directory window.
2 Select the page menu command “Load selected” to open
the dialog box.
3 In “Advanced Conversion Load,” select how the AKAI
Program file will be loaded.
On (checked):
Program file parameters such as key
group, key group zone, oscillator, pitch, filter, amp/pan,
LFO, and EG will be converted into a TRITON STUDIO
program or programs and combination.
Off (unchecked):
The operation will be the same as in
operating system version 1.0. The selected Program file
will be loaded as a multisample. Only the keymap-
related parameters of the Program file will be loaded to
create a multisample. (
☞PG p.164 “28) Load AKAI Pro-
gram File,” PG p.165 “About AKAI Program files”)
Multisamples and samples will also be convert-loaded
at this time. (For details, refer to
☞PG p.164 “28) Load
AKAI Program File”)
4 If you checked “Advanced Conversion Load,” use
“Append to: Combination”
to specify the destination
bank and number of the combination that will be created
by the convert-load operation. When you execute the
command, the combinations that are created will be
loaded starting at the bank and number you specify here.
5 If you checked “Advanced Conversion Load,” use
“Append to: Program”
to specify the destination bank
and number of the program that will be created by the
convert-load operation. When you execute the com-
mand, the programs that are created will be loaded start-
ing at the bank and number you specify here.
Depending on the structure of the AKAI Program, the
data may be converted into multiple programs and one
combination. In this case, the number of programs
resulting from the conversion is limited to the maxi-
mum number of eight programs usable in a combina-
tion, and a message of “Exceeded 8 Programs” will
appear (
☞p.71). Please be aware of this when loading
an AKAI Program that has a complex structure.
If the loading-destination bank and number exceed
EXB-G127, loading will automatically stop.
The data in the locations following the specified bank/
number will be rewritten when you load. If you want to
keep this data, use “Save All” or “Save PCG” before
you load the AKAI Program data.
Add the contents of “Advanced Conversion Load” to the
explanation of “Parameter Guide” 0–1: Load – 28) Load
AKAI Program File (
☞PG p.164).
Load AKAI Volume
“Load AKAI Volume” has been added to the 0–1: Load page
menu command “Load selected” (0–1C
☞PG p.157). This
command allows you to load a set of Program files and Sam-
ple files in one operation from an AKAI S1000/S3000 format
sample CD volume. This is especially useful in loading cer-
tain third-party CD-ROMs, which are designed to be loaded
in this fashion
The Program files and Sample files on an AKAI S1000/S3000
format sample CD are organized into partitions and volumes.
Version 2.0 supports loading from a volume. All of the Program
files and Sample files in the volume will be loaded at once.
Advanced Conversion Load
(Load AKAI Program File)