KORG TRITON STUDIO V2 - Manual (Page 66)

61
Disk
Global
Sampling
Combination
Program
Other functionality
You can now use the “Insert,” “Mix,” and “Paste” page
menu commands of the Sampling P1: Sample Edit page
(
☞PG p.102–103) to insert/mix/paste data from a WAVE file
stored on the hard drive into a sample in sample memory
(RAM).
A “From” field has been added to the dialog box of each
page menu command.
Dialog box of the “Insert” page menu command
Use “From” to select the copy-source of the data.
RAM:
The data copied from the specified region in the Sam-
ple Edit page will be inserted/mixed/pasted into a sample
in sample memory (RAM). This is the same operation as on
previous versions.
DISK:
The data copied from the specified region in the Disk
mode Edit WAVE page will be inserted/mixed/pasted into
a sample in sample memory (RAM).
Copying data from a WAVE file, and inserting it in a
sample
Here’s an example of how to copy data from a WAVE file
and insert it into a sample that is in sample memory.
1 Access the Disk mode Load page.
2 Select the copy-source WAVE file.
3 Go to the Edit WAVE page.
4 Use “Edit Range Start” and “Edit Range End” to specify
the region of data that you want to copy.
You can press the SAMPLING [START/STOP] key to
hear the selected region of data.
5 Select the page menu command “Copy” to open the dia-
log box.
6 The Range: “Start” and “End” fields will show the
region of data that will be copied. Press the OK button to
execute the copy.
The data that is read into the buffer when you execute
“Copy” is actually only the name of the copy-source
WAVE file and the “Edit Range Start” and “Edit Range
End” locations. After executing the copy, do not delete
the copy-source WAVE file until you have actually exe-
cuted the insert/mix/paste command.
7 Access the Sampling mode Edit Sample page.
8 Use “Sample Select” (1–1b ☞PG p.100) to select the sam-
ple into which you want to insert the data. Use “Edit
Range Start”
to specify the starting address at which the
data will be inserted.
The “Edit Range End” setting will be ignored.
9 Select the page menu command “Insert” to open the dia-
log box.
0 In “From,” select DISK.
If you select DISK, the data copied from the WAVE file
on the hard drive will be inserted into the sample data.
A The “To: Start” field will indicate the starting address at
which the data will be inserted.
B Use “Save to No.” to specify the save-destination sample
number. An unused sample number will be selected here
by default.
You cannot select this if “Overwrite” is checked. (
☞PG
p.101)
Page menu commands Insert,
Mix, Paste