KORG TRITON STUDIO V2 - Manual (Page 65)

60
Automatically-set parameters and their values
- : Not set automatically
Values enclosed in parentheses ( ) are automatically set according to the settings you make in the dialog box.
*1 : Settings for analog, S/P DIF, and mLAN (“Input 1” and “Input 2”) are made automatically.
*2
: The input source setting (“Input 1” and “Input 2”) you specified for “Source Audio” in the dialog box will be set automati-
cally.
*3 : If “IFX” is Off this will be L/R. If IFX1...5 is selected this will be IFX1...5.
*4
: If “Source Audio” is Mono-1 this will be L-Mono, if Mono-2 this will be R-Mono, and if Stereo this will be Stereo.
Parameter 1. Initialize 2. REC Audio Input 3. Auto Resample through IFX
Input (Input Source) Analog, S/P DIF, mLAN *1 (Source Audio) *2 Analog, S/P DIF, mLAN *1
Input1 Level 127 127 127
Pan L000 L000 L000
BUS Select Off (IFX)*3 Off
Send1 000 000 000
Send2 000 000 000
Input2 Level 127 127 127
Pan R127 (IFX) *3 R127
BUS Select Off Off Off
Send1 000 000 000
Send2 000 000 000
Recording Setup Source BUS L/R L/R L/R
Trigger Sampling START SW Sampling START SW Sampling START SW
Metronome Precount Off - -
Resample Manual Manual Auto
REC Sample Setup Save to RAM (Save to) RAM
Sample Mode L-Mono (Source Audio)*4 Stereo
Sample Time: RAM Maximum - -
Sample Time: DISK 4min 59.999sec - -
Recording Level [dB] +0.0 +0.0 –12.0
REC Sample Preference Auto +12dB On Off Off On
BUS Select (P8 Routing) BUS(IFX) Select L/R L/R (IFX)