Automatically-set parameters and their values, Ters and their values, P.69) – KORG TRITON STUDIO V2 User Manual
Page 74: P.69. for examples of using the automatically-set
69
Disk
Global
Sampling
Combination
Program
Other functionality
Automatically-set parameters and their values
- : Not set automatically
Values enclosed in parentheses ( ) are automatically set according to the settings you make in the dialog box.
*1
: Settings for Analog, S/P DIF, and mLAN (“Input 1” and “Input 2”) are made automatically.
*2
: The input source setting (“Input 1” and “Input 2”) you specified for “Source Audio” in the dialog box will be set automati-
cally.
*3
: If “Source Audio” is Mono-1 this will be L-Mono, if Mono-2 this will be R-Mono, and if Stereo this will be Stereo.
*4
: When “Save to: RAM,” and “Convert to Program” is checked.
Parameter
1. Initialize
2. Resample Program Play
3. REC Audio Input
Input (Input Source)
(Analog, S/P DIF, mLAN)
*1
(Source Audio)
*2
(Source Audio)
*2
Input1
Level
127
127
127
Pan
L000
L000
L000
BUS Select
Off
Off
1/2
Send1
000
000
000
Send2
000
000
000
Input2
Level
127
127
127
Pan
R127
R127
R127
BUS Select
Off
Off
1/2
Send1
000
000
000
Send2
000
000
000
Sampling Setup
Source BUS
L/R
L/R
Indiv.1/2
Trigger
Note On
Note On
Sampling START SW
Metronome Precount
Off
-
-
Save to
RAM
(Save to)
(Save to)
Mode
Stereo
Stereo
(Source Audio)
*3
Sample Time: RAM
Maximum
-
-
Sample Time: DISK
4min 59.999sec
-
-
Recording Level [dB]
–12.0
–12.0
+0.0
Select Bank
(Page Menu Command)
Auto +12dB On
On
On
Off
Convert to Program
Off
(Convert to Program)
(Convert to Program)
Program
-
(Program)
(Program)
MS
-
Newly created
*4
Newly created
*4
Orig.Key
-
C2
*4
C2
*4