Lincoln Electric COMMANDER 500 IM644-A - Manual (Page 46)

F-10 DIAGRAMS F-10
COMMANDER 500
CONNECTION DIAGRAM:
or service this equipment.
K432-"L" CABLE
ELECTRODE CABLE
14 PIN
LN-25 WIRE FEEDER WITH K431 OPTION
Keep away from moving parts.
N.B. DIAGRAM SHOWS ELECTRODE POSTIVE. TO CHANGE POLARITY, TURN POWER "OFF". N.C. MOUNT K433 TO ENGINE WELDER PER INSTRUCTIONS PACKAGED WITH K433.
REVERSE ELECTRODE AND WORK CABLES AT POWER SOURCE, SWITCH LN-25 POLARITY SWITCH.
N.D. INSULATE EACH UNUSED LEAD INDIVIDUALLY. N.E. SPLICE LEADS AND INSULATE.
7-18-98
AMPHENOL
Only qualified personnel should install,use Keep guards in place.
WORK
S23993
N.A. WELDING CABLE MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.
CONNECTION DIAGRAM
ELECTRODE
TO WORK
ADAPTER PLUG K867 UNIVERSAL
GND
N.E.
}
K433
81 82
SPARE
41
COMMANDER/ LN-25 WITH L431, K433 & K432-"L" OPTION
WARNING
Do not touch electrically live parts. before servicing. Disconnect NEGATIVE (-) BATTERY LEAD Do not operate with panels open.
42
} 2 4
32
2
31
4
32 31
N.D.
21 75 76
GND
77
75 76 77