Lincoln Electric EAGLE SVM192-A - Manual (Page 19)

OPERATION B-3 B-3
EAGLE™ 10,000
RANGE SWITCH
The “Range” switch is used to select one of three
amperage ranges with generous overlap for Stick/TIG
welding, or one Wire Feed welding range
Never change the “RANGE” Switch setting while
welding. This will damage the switch.
------------------------------------------------------------------------
CONTROL DIAL
The Control Dial provides a fine welding current adjust-
ment within the Range Switch settings.
CAUTION
KOHLER
CH20S or CH23S
.39 Gallons/Hour
(1.49 Liters/Hour)
.74 Gallons/Hour
(2.79 Liters/Hour)
1.29 Gallons/Hour
(4.87 Liters/Hour)
1.40 Gallons/Hour)
(5.31 Liters/Hour)
Low Idle - No Load
2200 RPM
High Idle - No Load
3700 RPM
DC CC Weld Output
210 Amps @ 25 Volts
Auxiliary Power
9000 Watts
EAGLE 10,000 APPROXIMATE FUEL CONSUMPTION
Process Range Setting Current Range
STICK/TIG
(constant current)
(3 range settings)
90 Max.
145 Max.
210 Max.
50 to 90 Amps
70 to 145 Amps
120 to 210 Amps
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC