Lincoln Electric EAGLE SVM192-A - Manual (Page 68)

TROUBLESHOOTING AND REPAIR F-32 F-32
EAGLE™ 10,000
This is the typical DC output voltage
generated from a properly operating
machine. Note that each vertical divi-
sion represents 20 volts and that
each horizontal division represents 5
milliseconds in time. The machine
was loaded with a resistance grid
bank.
Note: Scope probes connected at
machine output terminals.
SCOPE SETTINGS
Volts/Div.....................20V/Div.
Horizontal Sweep .....5 ms/Div.
Coupling.............................DC
Trigger .........................Internal
MACHINE LOADED TO 200 AMPS AT 26 VDC
TYPICAL DC WELD OUTPUT WAVEFORM (CC MODE)
MACHINE LOADED
CH1
0 volts
5 ms 20 volts
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC