Loctite CARTESIAN 400 - Manual (Page 6)

FOR YOUR SAFETY
Confirm that the unit is properly grounded.
Power supply earth should be connected complying with Type D installation.
(under 100 Ω of resistance.)
Insufficient grounding can cause electric shock, fire, or malfunction of the unit.
Plug the power cord into the wall outlet firmly.
Incomplete insertion into the wall outlet makes the plug hot and can cause fire.
Check that the plug is not covered with dust.
Be sure to shut off the power supply before connecting the power cord to the
control box.
Place the unit on a suitable flat surface that can support its weight.
Be sure to leave a space greater than 30cm between the back of the robot
(equipped with a cooling fan) and the wall.
An insufficient or unstable area can cause the unit to fall, overturn, breakdown,
or overheat.
Do not attempt to disassemble or modify the machine.
Disassembly or modification may cause electric shocks, fire or malfunction.
Be sure to use within the voltage range indicated on the unit.
Failure to do so may cause electric shock or fire.
Do not use the unit near inflammable or corrosive gas.
If leaked gas accumulates around the unit, it can cause fire.
IP Protection Rating is IP40.
Place the unit in a well-ventilated area for the health and safety of the
operator.
Turn off the unit before inserting and removing cables.
Failure to do so may result in electric shock, fire, or malfunction of the unit.
IP Protection Rating is “IP40.”
Warnings
Features II CARTESIAN Benchtop Robot v