Loctite CARTESIAN 400 - Manual (Page 35)

Pallet : #palletflag (1 to 100), #palletCount (1 to 100)
#palletCount(1 to 100) is a numeric variable and #palletflag(1 to 100) is a Boolean variable.
These variables retain the value of the pallet counter and pallet flag of the “Pallet Routine” under
Additional function data (1 (true) when the pallet counter is full).
By using this variable, a pallet can be moved to the next point, etc. midway or a given pallet can be
skipped.
Category Identifier Description
#palletflag
(1 to 100)
Pallet flag (corresponds to pallet 1 to 100)
Pallet
#palletCount
(1 to 100)
Pallet counter (corresponds to pallet 1 to 100)
#palletFlag (1 to 100) does not become “1” (true) even if a value which fills the counter is
assigned to #palletcount (1 to 100).
e.g.) Perform a pallet job by skipping a given pallet.
Pick up a workpiece at P1, places it on the pallet (set at P2) and advances to the next point (P3) where the
pallet becomes full. However, there are 2 points (P2-5, P2-11) on the pallet where a workpiece is not
placed.
The pallet becomes pallet number 3, and the tool is connected using the following settings.
“Pick up workpiece” (pick up): #handOut1=ON
”Place workpiece” (place): #handOut1=OFF
P2-1(P0) P2-2 (Omitted)
P1
To P3
P2-12
●
● P2-5
P2-11
Points where work is not performed
Features II CARTESIAN Benchtop Robot 17