Lucent Technologies Definity System 85 - Manual (Page 22)

22
1 Make the list private.
2 Make the list public.
4. Enter an address and press #.
If the user is in a different location, you may need to add a prefix to the extension.
NOTE:
When including email-only users, be sure you are in name-addressing mode. You may
need to press * 2 ( * A ) to change addressing modes.
5. Repeat Step 4 until the list is complete.
6. Press # to approve.
+ Tips When creating a list, you can also include an
existing list by entering * L ( * 5 ) at step 4.