Lowrance electronic EP-60R - Manual (Page 17)

17
To Reset Trip Fuel (Rst trip f)
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
MENU
. Highlight
F
UEL MNGR
and press
MENU
.
2. Select
R
ST TRIP F
(Reset Trip Fuel) and press
MENU
. The Select Engine
menu will appear with up to four options. Select the desired engine or
All Engines and press
MENU
. (If you are using a single-engine
configuration you will not see the Select Engine menu.)
3. The following message will appear: Hit Menu to Rst Trip F. Press
MENU
, which will reset the trip fuel used to zero.
Reset Seasonal Fuel (Rst Seas)
The LMF-200 uses fuel flow data to keep a running total of fuel used
for a season. By using the Reset Seasonal command, you can reset to
zero the running total of fuel used for a season.
To reset seasonal fuel:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
MENU
. Highlight
F
UEL MNGR
and press
MENU
.
2. Choose
R
ST
S
EAS
and press
MENU
. If you have more than one engine,
the Select Engine menu will appear with up to four options.
3. Select the desired engine or All Engines and press
MENU
. The
following message will appear: Hit Menu to Rst USD:S.
3. Press
MENU
, which will take you back to the main display.
Fuel Warning
The Fuel Warning feature allows you to set a Low level or High level
alarm for each fuel tank. A pop-up window will appear and an alarm
will sound if the amount of fuel rises above (High Level) or falls below
(Low level) the selected percentage of tank capacity.
To set a fuel warning:
1. Press
MENU
, select
S
YSTEM
S
ETUP
and press
MENU
.
2. Highlight
B
US
D
EVICES
and press
MENU
to display the Bus Devices list.
Select the desired Fuel Flow (FFlow) and press
MENU
. The
Configuration Options menu will appear.
3. Select
F
UEL
W
ARNING
(Fuel Wrng) and press
MENU
.
4. The Select Level menu will appear with two options: High Level and
Low Level.
5. Select the desired level and press
MENU
. The Level Percentage
window will appear. It will be set to Off by default.