Lowrance electronic EP-60R - Manual (Page 28)

28
NOTE:
When using the Partial Fill command, you will only be able to input
into the gauge, an amount of fuel less or equal to the fuel used
figure. The unit will not allow you to enter a fuel amount greater
than the fuel used figure.
4. Use the
UP
and
DOWN
keys to input the amount of fuel added to the
tank and press
ENTER
. You will be taken back to the main display.
Economy Speed Source
The Economy Speed menu allows you to choose what speed source
(Water Speed, Pitot Speed or Ground Speed) the LMF-400 will use to
calculate Fuel Economy. Ground Speed (GPS) is the default speed
source.
To change Economy Speed source:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
. Select
F
UEL
S
ETUP
and press
ENTER
.
2. Highlight
E
CO SPEED
S
RC
and press
ENTER
to open the Economy Speed
menu. The menu has three options: Water Speed (Paddlewheel), Pitot
Speed and Ground Speed (GPS).
3. Select the desired speed source and press
ENTER
. You will be taken
back to the main display.
Reset Trip Fuel
The LMF-400 keeps a running total of fuel used for a trip. By using the
Reset Trip command, you can reset to zero the running total of fuel
used on a trip.
To reset trip fuel:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
. Select
F
UEL
S
ETUP
and press
ENTER
.
2. Highlight
R
ST
T
RIP
F
UEL
and press
ENTER
. The Select Engine menu
will appear with up to four options. (If you have one tank, the Press
Enter to reset Trip Fuel (Step 3) message will appear.)
3. Select the desired engine or All Engines and press
ENTER
. The
following message will appear: Press Enter to reset Trip Fuel.
4. Press
ENTER
, which will reset the trip fuel to zero and take you back
to the main display.
Reset Seasonal
The LMF-400 keeps a running total of fuel used for a season. By using
the Reset Seasonal command, you can reset to zero the running total of
fuel used for a season.