Lowrance electronic EP-60R - Manual (Page 27)

27
2. Highlight
B
US
D
EVICES
and press
ENTER
. Highlight the fuel flow you
want to reset and press
ENTER
.
3. Select
R
ESET
C
AL
from the fuel flow menu and press
ENTER
. The
following message will appear: Press Enter to reset the Calibration.
4. Press
ENTER
to set calibration back to default settings. To recalibrate
the fuel flow, follow the fuel flow calibration steps in this section.
Refill Tank
Since the EP-60R is not connected to the tank, its fuel information is
not automatically updated when the tank is filled up. You must use the
Refill Tank command to ensure the fuel information in the EP-60R
stays consistent with the amount of fuel actually in the tank.
To refill tank:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Highlight
F
UEL
S
ETUP
and press
ENTER
.
3. Select
R
EFILL
T
ANK
and press
ENTER
. The select Tank menu will
appear with up to three options. Select the tank you refilled and press
ENTER
. (If you have one tank, you will be taken directly to the
recalibration window mentioned in step 4.)
4. A recalibration window will appear with two options: Yes and No.
Select
N
O
and press
ENTER
. The following message will appear: Press
Enter after refilling the fuel tank.
5. Press
ENTER
. You will be directed back to the main display.
Partial Fill
Since the EP-60R is not connected to the tank, its fuel information is
not automatically updated when fuel is added to the tank. When you
add fuel to a tank without completely filling it up, you must use the
Partial Fill command. This will ensure the fuel information in the EP-
60R stays consistent with the amount of fuel actually in the tank.
To use Partial Fill:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
. Highlight
F
UEL
S
ETUP
and press
ENTER
.
2. Select
P
ARTIAL
F
ILL
and press
ENTER
. The Select Tank menu will
appear with up to three options. (If you have one tank, you will be
taken directly to the Adding Fuel window.)
3. Select the desired tank and press
ENTER
. The Adding Fuel window
will appear.