LOREX Technology LH330 EDGE2 - Manual (Page 138)

120
Appendix G: Upgrading Firmware
4 Click the Delete all button.
Delete all
NOTE: Clicking the Delete all button clears all
internet history, temp files, cookies, and
saved form data.
5 Click Yes on the prompt.
6 Click Close and then click OK to exit and save
your changes.
7 Restart Internet Explorer.
8 After you have cleared your internet cache,
reconnect to your DVR. You may have to
re-install ActiveX plug-ins upon initial
connection.
If you still have problems connecting to your
DVR after clearing your Internet Explorer
cache, try setting your Internet Explorer
security settings to "Medium-high." Or
alternatively, use Lorex Client 12 (provided on
the CD) to connect to your DVR. For installation
instructions, see “Step 3 of 4: Install the Client
Software on your PC or Mac” on page 53
To set your security settings in Internet Explorer 8:
1 Open Internet Explorer.
2 Click Tools>Internet Options.
3 Click the Security tab.
4 Under Security levels for this zone, drag the slider and set the security level to Medium-high.
Security tab
5 Click OK to save your settings. Restart Internet Explorer, and reconnect to your DVR.