LOREX Technology LH330 EDGE2 - Manual (Page 82)

64
PC and Mac Client Software for Remote Viewing
• Capture: Click to take a screenshot of the display screen.
• HDD Reader: Click to playback / backup video from an external hard drive (not included)
connected to the computer using a USB cable (not included). This allows you to quickly backup
long segments of video, such as hours or days.
• REC: Click to record live video onto your computer hard drive.
• Large: Click to stretch the video to the edge of the gray area. Click Small to show the video
in its original proportions.
8 Modes:
• Live: Click to view live, streaming video; view cameras in full-screen or split-screen.
• Playback: Click to view recorded video from the system.
• Backup: Click to save recorded video data to your computer.
• Setup: Click to open Setup Mode.
9 Views: Click to view in Quad, 9-split, or 16-split (16-split available on 16-channel only).
10 Channels: Click to view channels in full-screen.
DVR List: Managing DVRs
DVR List
DVR List is used to save the connectivity
information for your DVR or DVRs. You can use it
to add a new DVR or modify or delete an existing
DVR.
You can also have multiple entries in your DVR
List for the same DVR. For example, on
computers on the same network as your DVR, you
can have one entry for the local IP address of your
DVR and one entry for the DDNS address of your
DVR. This can be useful if you have a laptop. When
you are at home, you can view the DVR using the
local IP address, which saves bandwidth and
provides a faster connection. When you are out,
you can connect over the Internet using the DDNS
address.
Adding a DVR
1 From the Client window, click DVR List. The DVR List appears.
2 Click Add.
3 Configure the following: