LOREX Technology LH330 EDGE2 - Manual (Page 80)

62
PC and Mac Client Software for Remote Viewing
PC and Mac Client Software for Remote Viewing
Client Software is available that allows you to access your system from any PC or Mac with
an Internet connection. The Client Software is compatible with any Edge Series DVR, and it
can save the device information for multiple DVRs. This means you can easily switch
between multiple DVRs located in your home, business, or properties without having to
re-enter the address or password.
NOTE: This section assumes that you have completed all the steps in the previous section
to enable your DVR for remote viewing.
NOTE: Check www.lorextechnology.com for software updates.
Network User Accounts
Level User ID Password
USER1 7 1111
USER2 8 2222
ADMIN 9 3333
Remote/LAN Access:
In order to login to the DVR remotely, you need a
Remote Access user ID and password. See the
table on the right for the default Remote Access
user IDs and passwords. For a detailed
description of user accounts, see “User
Accounts” on page 28.
Running the Client Software
NOTE: For installation instructions, see “Step 3 of 4: Install the Client Software on your PC or
Mac” on page 53.
• (PC) Double-click the Lorex Client 12 icon ( ) on the desktop. If a security warning
appears, click Yes. The client window opens.
• (Mac) Double-click Edge Client Software in your Applications folder. The client window
appears.
Edge Client
Software (Mac)