LOREX Technology LH330 EDGE2 - Manual (Page 117)

99
Mobile Apps: Accessing your DVR Using a Mobile Device
3 Open the MobileView application.
MobileView
Opening Mobile View
4 Under IP/DDNS, enter the
DVR’s DDNS address in full
(e.g. tomsmith.lorexddns.net )
1
.
Select KEEP ME SIGNED IN
to save your log in
information
Connecting to your DVR
5 Under PORT, enter the DVR’s
HTTP port.
6 Under ID, enter the remote
access user ID for the DVR.
7 Under PASSWORD, enter the
remote access password
for
the DVR.
• If you would like Mobile View to save your user ID and password, check Keep Me Signed In.
8 Click the CONNECT button to begin live viewing.
NOTE: If you are unable to connect, check to make sure you have enabled APN on your
Blackberry. For details, see “Enabling APN (Access Point Name) on Your
Blackberry” on page 100.
Viewing Your DVR on your Blackberry
Once you have entered your DVR’s system information, you can begin live viewing. You can
view a single channel of video stream of your DVR. Split screen view is not available.
NOTE: If you exit Mobile View, you must wait 30 seconds before starting Mobile View again.
1. Some routers may prevent you from connecting to your DVR using a DDNS address on a local
network. If you are unable to connect, try disabling WiFi on your mobile device and attempt to
connect using the 3G or mobile network. If you need to use WiFi, use the DVR’s internal IP address
to connect.