LOREX Technology LH330 EDGE2 - Manual (Page 130)

112
Appendix D: Recording and Playing Audio
6 Click Audio, and then scroll
up / down to select the
channel your camera is
connected to.
Video Frame Rate Menu
Select Audio
channel
• If you are using a
self-powered microphone
(not included) select the
channel you would like to
record audio to.
7 Right-click to save your
changes and return to the
Record Menu. Continue
right-clicking to exit all
menus and return to live viewing.
NOTE: The DVR will record audio from your camera according to the recording settings;
however, it will only play audio when the audio-enabled channel is selected in
Full-Screen / Single-Channel mode. It will not play audio in Split-Screen mode.
Playing Audio from your DVR
Audio OUT
(Not included)
SELF-POWERED
SPEAKERS
HDMI TV/

MONITOR*
(Not included)
Audio & Video
(HDMI cable)
HDMI
* Your TV/monitor must have built-in speakers or be connected to speakers to play audio from your DVR.
8-channel model shown
Audio
(RCA cable)
• Connect an HDMI cable (not included) from the HDMI port on the rear panel of the DVR to an
HDMI port on a TV or monitor with internal speakers. Power on the TV or monitor.
• OR Connect a RCA audio cable (not included) from the Audio OUT port on the rear panel of
the DVR to a set of self-powered speakers (not included).
NOTE: You can only play audio from the DVR if an audio-capable camera (not included) or
self-powered microphone (not included) is connected.