Landmark Lighting D20R2-06/99 User Manual
Page 12
b. Cursor-select the CPU BUSY field to display the CPU History
Activity Menu.
c.
Enter MAINMENU or = on the command line to return to the
Primary Menu.
6. Verify Supertrace.
a.
Select Option 5, Supertrace, from the Primary Menu to
display the Supertrace Menu.
b. Select Option 4, System Memory Profile, to display the
System Memory Profile screen. It shows information on
storage usage by address space during the last interval.
c.
Enter MAINMENU or = on the command line to return to the
Primary Menu.
7. Verify Utilities.
a.
Select Option 6, Utilities, from the Primary Menu to display
the Utilities Menu.
b. Select Option 1, Systems Services, to display the Systems
Services Menu.
c.
Select Option 1, APF Utility, to display the APF Utility screen.
It shows the data set name and volume serial number of
every currently authorized library in the APF list.
d. Enter MAINMENU or = on the command line to return to the
Primary Menu.
8. Verify the Delay Monitor.
a.
Select Option 7, Delay Monitor, from the Primary Menu to
display the Delay Monitor Menu.
b. Select Option 1, Delay Analysis Summary, to display the
Delay Analysis Summary screen. It shows a breakdown of
delay activity by job.
c.
Enter MAINMENU or = on the command line to return to the
Primary Menu.
9. Verify Remote Sessions.
a.
Select Option S, System Administration, from the Primary
Menu to display the System Administration Menu.
b. Select Option 1, Remote Sessions, to display the Remote
Sessions Directory screen. It lists all Landmark products
defined in your network.
Review each entry. If no changes are required, skip Steps c and
d.
c.
If the VTAM definition shipped in the TMON for MVS
.INSTLIB has been modified by your site, enter the prefix
characters of VTAM SLU names in the SLU APPLID
PREFIX field. (The shipped TMON for MVS default is
IVP Steps
Chapter 1: Installation Verification Procedure
1-4