Landmark Lighting D20R2-06/99 - Manual (Page 35)

Primary Commands Enter the following commands on the command line.
ADD Adds user definitions to the control file.
Type over the appropriate fields
(PASSWORD, PROFILE, USER FULL
NAME, or USERID) to identify the new
user or profile ID; then enter this command
(or cursor-select the ADD field).
DELETE Deletes user definitions from the control
file. You also can cursor-select the DELETE
field to perform this function.
UPDATE Updates user definitions in the control file.
Type over the information you want to
change; then enter this command (or
cursor-select the UPDATE field).
For syntax and descriptions of all commands, see Chapter 2 in your
product reference manual.
Fields ➥
ADD
Adds a definition to the control file. Type over the appropriate
fields (PASSWORD, PROFILE, USER FULL NAME, or USERID) to
identify the new user or profile ID; then cursor-select this field to
add the definition to the control file. You also can use the ADD
command to perform this function.
➥
DELETE
Deletes a user definition from the control file.
Cursor-select this field to delete the definition. You also can use
the DELETE command to perform this function.
PASSWORD
Shows the 1- to 8-character password associated with the user ID.
When passwords are changed, they immediately affect product
security.
➥
PROFILE NAME
Displays the 1- to 8-character profile identifier for the product
associated with the user ID.
Cursor-select this field if you need information about a named
profile or if you want to update profile definitions. The
Profiles/Resources Directory screen, described later in this chapter,
is displayed.
➥
UPDATE
Updates a user definition in the control file. Type over the
information you want to change; then cursor-select this field to
update the definition in the control file. You also can use the
UPDATE command to perform this function.
Chapter 2: Security Definitions User Definition
The Monitor for MVS 2.0 2-19
System Administrator’s Guide