Paper jam in the paper support, Paper or specialty media misfeeds – Lexmark 5300 Series User Manual
Page 148
Paper jam in the paper support
1
Press to turn off the printer.
2
Firmly grasp the paper, and gently pull it out.
3
Press to turn the printer back on.
Paper or specialty media misfeeds
These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together.
Try one or more of the following:
C
HECK
PAPER
CONDITION
Use only new, unwrinkled paper.
C
HECK
PAPER
LOADING
•
Load a smaller amount of paper into the printer.
•
Load paper with the print side facing you. (If you are not sure which side is the printable side, see the instructions
that came with the paper.)
See “Loading paper” on page 48 and its related topics for information about:
•
Maximum loading amounts per paper type
•
Specific loading instructions for supported paper and specialty media
R
EMOVE
EACH
PAGE
AS
IT
IS
PRINTED
Remove each page as it exits, and let it dry completely before stacking.
A
DJUST
THE
PAPER
GUIDES
Adjust the paper guides:
•
When using media less than 8.5 inches wide
•
To rest against the edges of the paper or media, making sure it does not buckle
1
2
Troubleshooting
148