Connecting to a telephone – Lexmark 5300 Series User Manual
Page 33
2
Connect a telephone cord into the LINE port of the printer, and then plug it into an active telephone wall jack.
3
Remove the protective plug from the EXT port
of the printer.
4
Connect a second telephone cord from the computer modem to the EXT port
of the printer.
Connecting to a telephone
Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever
your telephone is located to make copies or to send and receive faxes without using a computer.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see the related topic, “Using an RJ11 adapter.”
1
Make sure you have the following:
•
A telephone
•
Two telephone cords
•
A telephone wall jack
Setting up the printer
33