Lincoln Electric Invertec V205-T - Manual (Page 72)

TROUBLESHOOTING AND REPAIR
OUTPUT FILTER BOARD TEST (continued)
F-36 F-36
V205-T AC/DC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
TEST PROCEDURE
1. Remove input power to the V205-T machine.
2. Using a phillips head screwdriver, remove the
case wraparound cover.
3. Perform the Capacitor Discharge Procedure
detailed earlier in this section.
4. Locate the Output Filter board and associated
plugs . Do not remove plugs from the
board. See Figure F.16.
5. Carefully apply the correct input voltage to the
V205-T and check for the correct secondary
voltages per Table F.12.
FIGURE F.16 OUTPUT FILTER BOARD LOCATION
Output Filter Board