Operation, Operating instructions, Safety instructions – Lincoln Electric CLASSICII SVM125-A User Manual
Page 16: General description, Warning
OPERATING INSTRUCTIONS
Read and understand this entire section before operat-
ing your Classic II.
SAFETY INSTRUCTIONS
Do not attempt to use this equipment until you have
thoroughly read all the operation and maintenance
manuals supplied with your machine. They include
important safety precautions; detailed engine starting,
operating, and maintenance instructions; and parts
lists.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or
electrodes with your skin or wet clothing.
• Insulate yourself from the work and
ground.
• Always wear dry insulating gloves.
FUMES AND GASES can be dan-
gerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to remove
fumes from breathing zone.
WELDING SPARKS can cause
fire or explosion.
• Keep flammable material away.
• Do not weld on containers that have held
combustibles.
ARC RAYS can burn.
• Wear eye, ear, and body protection.
ENGINE EXHAUST can kill.
• Use in open, well ventilated areas or
vent exhaust to the outside.
• Do not stack anything on or near the
engine.
MOVING PARTS can injure.
• Do not operate this equipment with any
of its doors open or guards off.
• Stop the engine before servicing it.
• Keep away from moving parts.
Only qualified personnel should install, use, or ser-
vice this equipment.
GENERAL DESCRIPTION
The Classic II is a heavy duty engine driven DC arc
welding power source capable of providing constant
current output for stick welding or DC TIG welding. The
Classic II is wound with all copper coils and is config-
ured in a new shorter case with no exciter stickout and
setup for one side service. With the addition of the
optional Wire Feed Module, the Classic II will provide
constant voltage output for running the LN-7 or LN-25.
This unit uses the Deutz F3L-1011F three-cylinder,
industrial air cooled diesel engine.
OPERATION
B-2
B-2
CLASSIC II
WARNING
WARNING