Operation, Welding capability, Limitations – Lincoln Electric CLASSICII SVM125-A User Manual
Page 18
Advertising
WELDING CAPABILITY
The Classic II is rated 250 amps, 30 volts constant cur-
rent DC at 60% duty cycle based on a ten minute time
period. Longer duty cycles at lower output currents are
possible.
The current is continuously variable from 40 to 325
amps DC.
LIMITATIONS
• The Classic II is not recommended for any process-
es besides those that are normally performed using
DC stick welding (SMAW) and DC TIG welding.
Specific limitations on using the Classic II for these
processes are described in the Welding Operation
section of this manual. Constant voltage welding is
available with the optional wire feed module.
OPERATION
B-4
B-4
CLASSIC II
Advertising