Lincoln Electric CLASSICII SVM125-A - Manual (Page 8)

Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
INSTALLATION
A-2 A-2
CLASSIC II
TECHNICAL SPECIFICATIONS - CLASSIC II
INPUT - DIESEL ENGINE
Manufacturer Description Speed Displacement Ignition Capacities
Deutz 3 cyl., 1725 RPM 125 cu. in. Electric Fuel: 15 gal.
F3L-1011F Air-cooled Full load (2049 cc) (57 liters)
diesel Oil: 6.3 qt.
28 HP @ 1800 RPM (6.0 liters)
1700 RPM High idle
1350 RPM
Low idle
RATED OUTPUT - WELDER
Duty Cycle Amps Volts at Rated Amperes
100% Duty Cycle 200 DC Constant Current 28V
60% Duty Cycle 250 DC Constant Current 40V
40% Duty Cycle 300 DC Constant Current 32V
OUTPUT - WELDER AND GENERATOR
Welding Ranges Max. Open Circuit Voltage Auxiliary Power (1)
40-325 Amps DC 98.5 3.0 kVA of 115/230 V, 60Hz Power
26 Amps @ 115 V
13 Amps @ 230 V
PHYSICAL DIMENSIONS
Height Width Depth Weight
49.94 in. 24 in. 60 in. 1340 lb.
1040 mm 610 mm 1524 mm 608 kg
1 CSA machines can draw 15 amps from either half of the receptacle. Non-CSA machines can draw 20 amps from either half of the
receptacle. Total combined load of all receptacles cannot exceed 3.0 kVA.