Lantronix XPress DR+ - Manual (Page 10)

XPress DR+ User Guide 10
Chapter 1: Using This Guide
Purpose and Audience
This manual describes the Lantronix XPress DR+ and XPress DR+W device servers.
These device servers are members of the XPress family that work with Industrial
Automation Protocols. The XPress DR+ W has wireless as well as wired capability.
This guide provides the information needed to configure, use, and update the XPress
DR+ device servers. It is for system administrators and those responsible for installing
and maintaining these device servers.
Summary of Chapters
The remaining chapters in this guide include:
Chapter Description
Chapter 2: Introduction Describes the main features of the XPress DR+ and the
protocols it supports.
Chapter 3: Installation and
Hardware Describes the unit's interfaces and power requirements.
Provides instructions for physically connecting the unit.
Chapter 4: XPress DR+W Describes the XPress DR+W and how to install and
configure the unit initially.
Chapter 5: Using DeviceInstaller Provides information for getting your unit up and running,
using DeviceInstaller to assign an IP address.
Chapter 6: Configuration Using
Web Manager Details using the Web Manager to set parameters such
as port and server properties.
Chapter 7: Configuration Using
Telnet or Serial Port (Setup
Mode) Provides instructions for accessing Setup Mode
(command line interface) using a Telnet connection
through the network or a terminal or terminal emulation
program through the serial port.
Chapter 8: Setup Mode: Server
Configuration Details the network (server) settings
Chapter 9: Setup Mode:
Channel Configuration Details the serial port settings.
Chapter 10: Setup Mode:
Advanced Settings Details email, expert, and security settings and explains
how to reset the unit to factory default values.
Chapter 11: Firmware Upgrades Provides instructions for obtaining the latest firmware and
updating the XPress DR+.
Chapter 12: Monitor Mode Provides instructions for accessing and using the
command line interface for monitoring the network and
diagnosing problems.