Lantronix XPress DR+ - Manual (Page 11)

Chapter 1: Using This Guide
XPress DR+ User Guide 11
Chapter 13: Troubleshooting
and Technical Support Describes common problems and error messages and
how to contact Lantronix Technical Support.
Appendix A: Technical
Specifications Lists technical information about the unit.
Appendix C: Alternative
Methods of Assigning an IP
Address Describes other ways to assign an IP address, for
example, though ARP and Telnet.
Appendix D: Binary to
Hexadecimal Conversions Provides instructions for converting binary numbers to
hexadecimals.
Appendix E: Compliance
Information Provides the Declaration of Conformity and other
regulatory information.
Appendix F: Warranty
Additional Documentation
The following guides are available on the product CD and the Lantronix web site
(
www.lantronix.com ).
XPress DR+ Quick Start or XPress
DR+W Quick Start Provides the steps for getting the XPress DR+ or
XPress DR+W up and running.
Com Port Redirector Quick Start
and Com Port Redirector Online
Help Provides information on using the Windows-based
utility to create a virtual com port.
DeviceInstaller Online Help Provides information on using DeviceInstaller to
locate Lantronix devices on the network and
configure IP addresses.
"Live" tutorials on the Lantronix
Web Site Explain and demonstrate assigning an IP address
and setting up the unit and the Redirector. See
http://ts.lantronix.com/tutorials.html .
Note: The instructions for the UDS products apply
to the XPress DR+ as well.
Protocol documentation Provides guides for the protocols, such as Modbus
Bridge and Multi-Master DF1, which you can load
on the XPress DR+.