Lantronix XPress DR+ - Manual (Page 49)

Chapter 6: Configuration Using Web Manager
XPress DR+ User Guide 49
Figure 6-3. Server Settings
To configure the unit's device server settings:
1. On the main menu, click Server.
2. Configure or modify the following fields:
Server Configuration
Telnet Password Enter the password required for Telnet access.
Retype Password Re-enter the password required for Telnet access.
Advanced
ARP Cache Timeout When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive Defines how many seconds the unit waits during an inactive
connection before checking its status. If the unit does not
receive a response, it drops that connection. Enter a value
between 0 and 65 seconds. 0 disables keepalive. The default
setting is 45.
Monitor Mode @ Bootup Select Disable to disable entry into the monitor mode using
the yyy or xx1 key sequence at startup. This field prevents
the unit from entering monitor mode by interpreting the stream
of characters that are received during the device server's
initialization at startup.
HTTP Server Port This option allows the configuration of the web server port
number. The valid range is 1-65535. The default setting is 80.