Liebert Cooling System XDV - Manual (Page 11)

General product information
5
3.3.2 Unit Handling
If possible, transport the unit using a forklift or pallet jack.
• If using a forklift or pallet jack, ensure that the fork tine length is suitable to safely move the
packaged unit.
• Liebert Corporation recommends that the unit remain in the protective packaging until located at
the installation site.
• When handling and unpacking the unit, exercise great care to prevent damage.
• Do not use unit piping to lift or move the Liebert XDV
3.3.3 Unpacking the Unit
Domestic Packaging
1. Remove outer packaging when ready to install the Liebert XDV.
2. Keep the Liebert XDV covered by the unit bag until removal from pallet.
Figure 5 Removing domestic shipping package
Step 1
Step 2
Step 3
Step 5
Step 4
Plastic bag used for shipping
not shown for clarity.
Do not use unit piping to lift or
move the Liebert XDV