Liebert Cooling System XDV - Manual (Page 12)

General product information
6
Export Packaging
1. Unbend all metal tabs as indicated in Step 1 in Figure 6.
2. Remove outer packaging when ready to install the Liebert XDV.
3. Keep the Liebert XDV covered by the unit bag until removal from pallet.
4. Do not use unit piping to lift or move the Liebert XDV.
Figure 6 Removing export shipping package
Plastic bag used for shipping
not shown for clarity.
Do not use unit piping to lift
or move the Liebert XDV
Step 1
Step 2
Step 3
Step 4